Addonics Technologies DCHDIEU Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Addonics Technologies DCHDIEU. Addonics Technologies DCHDIEU 4 сторінки. Diamond combo hard drive
Друкувати сторінку
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy. If not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If the
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment on and off, the user is encouraged
to try and correct the interference by one or more of the following suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where
receiver is connected
Consult a certified television or radio technician
LIMITED WARRANTY
Addonics guarantees that every product is free from physical defects in material
and workmanship during the warranty period specified for each product when used
within the limits set forth in the Specifications section in the user guide.
Unauthorized tampering of the product or using it outside the scope of the
product specifications will result in voiding the warranty. If the product proves
defective during this warranty period, call Addonics Technical Support to obtain a
Return Authorization number. BE SURE TO HAVE YOUR PROOF OF
PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE
PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product,
mark the Return Authorization number clearly on the outside of the package and
include your original proof of purchase. Customers are responsible for paying the
shipping and handling of the products to Addonics warranty service location.
IN NO EVENT SHALL ADDONICS' LIABILITY EXCEED THE PRICE PAID FOR
THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE
PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.
Addonics makes no warranty or representation, expressed, implied, or statuary,
with respect to its products or the contents or use of the user guide and all
accompanying software, and specifically disclaims its quality, performance,
merchantability, or fitness for any particular purpose. Addonics reserves the right
to revise or update its products, software, or documentation without obligation to
notify any individual or entity.
Hardware Installation Guide
Step 1
Use a Philips screwdriver to
turn the cover securing
screw into the "OPEN"
position.
Step 2
Slide the aluminum cover
towards the back end of the
Diamond and remove it.
Step 3
For SATA Drive
Carefully place the SATA hard drive
with the label facing up into the
Diamond enclosure. Push the hard
drive towards the back end to secure
the drive connectors onto the
Diamond enclosure's SATA
connector.