Danoma DFPP2544 Інструкція з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Камін на відкритому повітрі Danoma DFPP2544. Danoma DFPP2544 4 сторінки. Fire pit & fire table
Друкувати сторінкуOutdoor Fire Pits Proper Care & Maintenance
Poly Material:Poly Fire Pits are made from High Density Polyethylene (HDPE), a recyclable plastic that will never need to be painted
or stained. It will not rot or splinter, and it contains an added UV protective agent to resist fading. Poly material is not affected by most
corrosive substances, and will not promote bacterial growth.
Cleaning: To maintain the beauty of your Poly Fire Pit, clean it regularly with soap and water. Use only nonabrasive soaps. While most
colors need to be cleaned only several times per year, certain colors such as White, (but not limited to this color) need to be cleaned
frequently in order to maintain its original beauty. In extreme situations and with colors such as White, spray the material thoroughly
with a nonabrasive cleaner then scrub using a soft bristle brush and rinse it off with warm clean water. If needed spray the Poly Fire Pit
with a nonabrasive cleaner and wash it using a high pressure washer. Do not place the tip of your pressure washer closer than 12", or it
will tear into the poly material. Your pressure washer should not exceed 2,800 PSI.
Melting and Stains: A Glass Wind Guard must be installed on Fire Pits with Poly Tops at all times to keep flames from touching the
material and avoid melting. Lighting or burning a fire pit without the glass wind guard installed may result in melting of the poly
material and voids the warranty. If any colored liquids such as wine, or soft drinks are spilled on your top, clean immediately to avoid
possible stains. Do not place flower pots or any items that will leave stains on fire pit. Do not place hot items directly on the top to
avoid melting.
Stainless Steel Components: Stainless Steel Heat Barrier used on Poly Tops to distance flames and heat from the material are 304 grade
stainless steel and may rust in normal outdoor conditions and/or coastal areas. In extreme conditions such as coastal areas, it is recom-
mended to regularly rinse Stainless Steel Components with fresh water to help prevent rusting. When not in use, covering your fire pit
with a waterproof fire pit cover is recommended to minimize the chances of rust.
Burner: See page nine (9) of the Crystal Fire Manual included with the Burner. Carefully read and follow all warnings and instructions
regarding use, service and maintenance.