Danpex ADP1100 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для PCI карта Danpex ADP1100. Danpex ADP1100 3 сторінки. Pci 10/100tx fast ethernet board

5. Boot ROM Installation

The PCI 10/100TX Boot ROM is available from your dealer.

To add the Remote Boot feature, insert the Boot ROM into

socket as shown in Fig. 2. Align the notch and pins on the

Boot ROM with the notch and pin receptacles on the ROM

socket. Gently push the Boot ROM into the socket, being

careful not to bend the pins.

PCI 10/100TX/Boot ROM is auto-configured with PCI slot

after your PC is initialized. The message is:

RPL – ROM – ADR

RPL – ROM – IRQ

RPL – ROM – PIQ

ADR is the Ethernet Node Address of PCI 10/100TX.

IRQ, PIO are PCI slot configuration, which is configured by

your system PCI BIOS.

: 0040-C7xx-xxxx (Node ID)

: x

(PCI slot IRQ no.)

: x000 (PCI slot IO address)