audiophony BM-Check Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису audiophony BM-Check. audiophony BM-Check 5 сторінок. Prosthesis simulator for loop amplifier with headphones
Друкувати сторінкуAUDIOPHONY PUBLIC ADDRESS
3 - Operation
The hearing loop tester works with an internal battery.
1. Place the headset on your ears and adjust it for comfortable listening.
2. Hold the hearing loop tester vertically and at head height to mimic the position of a hearing
aid.
3. Turn the unit on by turning the volume control slightly clockwise until a comfortable listening
sound is obtained. Turn the knob in the opposite direction to decrease the volume if
necessary..
4. If the orange LED does not light, check that the internal battery is correctly charged.
5. When you are finished using the headset, turn the volume knob counterclockwise until the
LED turns off.
Important
Always turn off the unit when it is not in use to extend its life.
Always hold the hearing loop tester at ear height and upright when listening to a loop system to
ensure the best possible performance.
English
Page 3