Consonance Linear 845 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Підсилювач Consonance Linear 845. Consonance Linear 845 11 сторінок.

300mm (12 inches), and that allowed by the standard interconnect lead being

maximum.

Many of the Consonance equipments, due to stringent requirements for

ultimate sonic reproduction, are extremely heavy in weight. If you are placing

the equipments on equipment rack or table please ensure that the frame is

structural sound for supporting the total weight of the equipments.

F. Cables, connections and speaker Impedance

Loudspeaker leads are also very important leads to suit your equipment

installation. The leads should each be at least 3.5 meters long and of equal

length. The recommended maximum is 20 meters. The loudspeaker

connectors supplied with all Consonance amplifiers and loudspeakers have

been specifically designed to make a tight mechanical connection. It is

essential that these are used in order to comply with local safety regulations.

For best performance, the load presented by the speaker has to match the

amplifier's output impedance. Refer to the manufacturer's information for your

speaker nominal impedance. All vacuum tube amplifier made by Opera Audio

are factory set to match the speakers at 8 ohms and 4 ohms.

General Warnings

Every piece of Consonance equipment is designed to produce the finest

sound quality that can be achieved, by avoiding compromise wherever

possible. This can lead to circumstances that may be unfamiliar to the

equipment owner. The material that follows contains advice specifically

related to Consonance equipment as well as more general warning about the

use of domestic audio products.

Please read it carefully:

The transformers in Consonance amplifiers and power supplies may

sometimes make a mechanical noise caused by distortion of the mains

waveform. Consonance transformers are large in size and have heavy gauge

secondary windings making them relatively sensitive to such distortion. A

separate mains circuit for your hi-fi system may reduce the effect while also

giving an overall improvement in sound quality. It may be necessary however

to take account of mechanical transformer noise when placing your equipment.

In some circumstances, depending on where you live and the grounding

arrangements in your home, you may experience radio frequency interference.

Controls on broadcasting in some territories allow very high levels of radio