Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU. Addonics Technologies Sapphire Cipher II Snap-In SSN6G-256EU 2 сторінки. With esata/usb 3.1 connection
Друкувати сторінку
Sapphire Cipher II Drive Cartridge System connection
Front view
Rear view
www.addonics.com
Overview
Technical Support (M-F 8:30am - 6:00pm PST)
Setting up the equipment
Insert a cipher key into the cipher key socket on the front of the Sapphire Cipher
1.
Open the removable drive door on the front and insert a 3.5" SATA hard drive into the
2.
removable drive bay with the drive connector facing inwards and the drive label facing
up. Make sure the drive slides in smoothly till it stops. Close the drive door till it is fully
latched.
Attach either the eSATA or USB 3.1/3.0 cable that comes with the unit to the back of the
3.
Sapphire Cipher II. Attach the other end of the cable to the eSATA or USB 3.1/3.0 port on
a computer.
Attach the included 12V power adapter to the power jack on the back of Sapphire Cipher
4.
II.
Turn on the power using the ON/OFF switch on the back. The power LED for the main
5.
unit show grow. A little blue LED to the left of the drive door should lit indicting there is
power to the drive.
On the computer and under the Disk Management, a new raw drive should appear
6.
waiting to be initialized and formatted. Please note that this will erase all existing data on
the drive beyond any possible recovery.
Once the drive is formatted, it is ready to be used like an ordinary drive. The new drive
7.
volume is now encrypted with the Cipher key. A new drive letter should appear under My
Computer. Data written to the drive will be encrypted. If the hard drive is removed from
the Sapphire Cipher II Drive Cartridge System and attached to another computer, the
drive will appear as a blank drive with no trace of any data.
Note: Once the Sapphire Cipher II drive shows up under in the computer, the cipher key can
be removed. The drive will remain operational till it is powered off or disconnected from the
computer. If the drive is left unattended and someone took the drive, the data in the drive will
not be accessible as the matching cipher key is required to reactivate the drive again.
The pair of Cipher keys are programmed with the same cipher code. It is important to keep
one of the keys in a safe place. In case one of the keys is lost or broken, you can order new
cipher keys and send in your last key to us to program the new keys with the same cipher
code. You may also order the RNG software (part # ASWRNG) to program your own cipher
code and duplicate more keys with the same code.
Addonics does not keep record of the cipher codes. There is no back door to retrieve the data
from your drive if you lose all your cipher keys
Included accessories
12V power adapter
100-cm eSATA cable
(AAP12V3A)
(AAESATA100C)
Phoner: 408-453-6212
6-foot USB 3.1/3.0
A pair of AES 256-
bit cipher keys
cabble (AAU3AB6F)
(AAENKEY256-2)
Email. www. Addonics.com/support/query/