Dante DLV1123A Посібник з монтажу та експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Цифрова камера Dante DLV1123A. Dante DLV1123A 4 сторінки. 1/3" high resolution 520tvl d/n camera
Друкувати сторінку
2. INSTALLATION
AUTO IRIS LENS
1. Remove the protective cap from the camera's lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn clockwise
slowly until it firmly attached.
3. Insert the cable Plug into the lens terminal socket located behind of the camera body.
4. For IRIS connector details see the following table.
IRIS JACK
1
2
3
4
MANUAL IRIS LENS
1. Remove the protective cap from the camera's lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn clockwise
slowly until it is firmly attached.
POWER SUPPLY
1. Before turning on the power to the camera, ensure that the lens is fitted with
the camera to avoid damage to the exposed CCD chipset.
2. Connect camera to 12VDC power supply.
CONNECTION
1. Connect the video outputs of the camera to the video inputs of a monitor or DVR.
2. Connect power supply to the power input on the camera then turn on the power.
3. Adjust the lens and camera's setting to get the best image.
DC LENS
DRIVE +
DRIVE -
DAMP +
DAMP -