Construct Pro CON9005 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Перемикач Construct Pro CON9005. Construct Pro CON9005 4 сторінки. 8x8 cat5e data hub
Друкувати сторінку
Congratulations on the purchase of your new Construct Pro 8x8 Data Module.
We appreciate you, our valued customer, and are proud to announce our
commitment to providing you with simple solutions for every installation.
The CON9005 is an excellent source for nearly every installation project. It is
uniquely designed to give you highest level of performance possible. Construct
Pro offers a wide range of high performance products and quality solutions.
IMPORTANT NOTES
· Be sure to read and understand all instructions.
· Product not intended for use in a wet environment.
· Do not install product during storms where lightning is present.
· Do not touch live wires during installation.
· Use caution during every installation and/or system modification.
INSTALLATION INSTRUCTIONS
Placing Your CON9005:
Since the high performance design is geared to fit most wiring enclosures,
placement is simple. In the event your installation requires slight modifica-
tions, custom compatibility pins are included. Use these pins when you need
to match the mounting pattern of other enclosures and/or equipment. Be sure
to consider the routing of your wires in order to place the module in the best
and most efficient manner.
Network Wiring:
Use only a standard 110 punch down tool to connect wiring to module. For
proper connection, see fig. 1.
Do not untwist pairs
more than 1/2"
* Using other tools
may cause damage
and result in poor
quality performance.
Use 110 punch down
tool.
fig. 1
2