Audioroot eSMART K-ART Посібник із швидкого старту
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Блок розподілу електроенергії Audioroot eSMART K-ART. Audioroot eSMART K-ART 7 сторінок. Location sound cart dual battery power distribution system with universal fuel gauge
Друкувати сторінку
eSMART K-ART
Location sound cart dual battery power distribution system with universal fuel
gauge
Version 1.2 Updated 14/10/2019
The AUDIOROOT eSMART K-ART is a low footprint power distribution box with a total of 16
direct DC power outputs and 4 x USB 5V ground isolated outputs. The K-ART includes 10 led
illuminated pushbutton power switches, a main pushbutton power switch and 2 battery fuel gauges.
Like it's little brother
from 9 to 18V. When used with our eSMART Li-xxWh or LiFe-xxxWh batteries the K-ART provides full
battery informations without any calibration routine.
This product was designed for use on small to medium size location sound carts. The power
distributor can be connected to 2 batteries at once. The 2 batteries will discharge simultaneously thru an
integrated ideal diode. These batteries can be of any type of chemistry (SLA, NI-MH or LI-ION) and the 2
fuel gauges provide all the informations required to monitor the batteries state of charge (voltage,
current, power, etc...).
The eSMART K-ART uses internal coulomb counters and a calibration routine to measure each
battery's true capacity and display it's remaining capacity in real time. This power distributor is also fully
compatible with our full line of smart batteries. When plugging an AUDIOROOT eSMART battery to the K-
ART the user will have access to all the battery's information without the need to perform any type of
calibration.
Key features :
10 switchable DC power paths via led illuminated push button switches (on/off state of each
•
switch is stored and recalled automatically on each power up)
1 main power illuminated push button switch
•
12 x HRS 4 DC power outputs (2 on the front, 10 on the rear of the unit, all Hirose outputs are
•
switched on and off by pairs)
4 x XLR 4 DC power outputs (1 on the front, 3 on the rear of the unit). Each XLR 4 output has it's
•
own power switch
4 ground isolated USB ports (allways on). 2 outputs are located on the front of the unit and 2
•
outputs are located on the rear of the unit. The K-ART can source up to a total of 3Amps on the 4
USB ports.
Real time SOC battery monitoring : remaining capacity (%), run time estimation, battery
•
voltage, power consumption, power and coulomb counter
Polyswitch 2.5A resetable fuses on each output
•
Polyswitch 8.0A resetable fuses on each battery input
•
A blinking LED for each battery indicates when the battery capacity falls below 10 %
•
Compatible with any battery ranging from 9 to 18V DC
•
Lightweight aluminum anodized enclosure
•
Size : 228 x 120 x 44mm
•
Weight : 700g
•
http://www.audioroot.fr [email protected]
eSMART BG-DU
the K-ART is fully compatible with any type of battery ranging
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation