Danver MOBILE KITCHEN CART AND COCINA Інструкція з монтажу Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Візок на відкритому повітрі Danver MOBILE KITCHEN CART AND COCINA. Danver MOBILE KITCHEN CART AND COCINA 6 сторінок.
Друкувати сторінку
ASSEMBLY
Step 1)
– Top & Skirt
•
Pre-drill hole if needed, 1/8" dia. x 1" deep maximum. Only
drill the hole for the optional drawer (if needed).
•
Items needed: Top (A), Front & Back skirts (B), Handle bar
skirt (C), Tool hanger skirt (D) and #10 screws (L).
•
Place Top (A) top side down on a soft flat surface such as carpet
or towels. (Fig- 1)
•
Place the short side of the Front skirt (B) on the underside of the
Top (A) with the skirt long side facing the outer edge of the Top
(A).
•
Use a Phillips head screwdriver and 3-#10 screws (L) to fasten
the skirt to the Top (A). Repeat for the Back skirt.
(Fig-2)
•
Fasten the Handle bar skirt (C) and the Tool hanger skirt (D) to
the Top (A) with 2-#10 screws (L) for each skirt.
Step 2)
Towel Bar (C3022 only)
•
Items needed: Towel bar (G) and Large screw and
washer (K) (located in handle)
•
Place the washer on the larger screw. There are two
large screws and washers one for each hole in the side
of the Towel bar skirt. (Fig. 3)
•
Place one screw through one hole in the skirt from the
inside. Align the screw with one end of the Towel bar
and screw-in two or three turns. Repeat for the other
end. (Fig. 4)
•
Tighten both screws with a Phillips head screw driver.
Fig-1
Fig-2
Fig-3
Fig-4