Belimo AF120 US Посібник
Переглянути онлайн або завантажити pdf Посібник для Контролер Belimo AF120 US. Belimo AF120 US 11 сторінок. On-off, spring return fail-safe, 120 or 230 vac
Друкувати сторінку
AF120 (-S) US, AF230 (-S) US
On-off, Spring Return Fail-Safe, 120 or 230 VAC
LISTED
U L
94D5
TEMP. IND &
.
REG. EQUIP
Technical Data
AF120 (-S) US
Power supply
120 VAC ± 10%
50/60 Hz
Power consumption
running: 6 W
holding: 2.3 W
Transformer sizing
10 VA
Electrical connection
3 ft, 18 GA appliance cable
1/2" conduit connector
Electrical protection
actuators are double insulated
Overload protection
electronic throughout 0° to 95° rotation
Angle of rotation
95°, adjustable 35 to 95° w/ ZDB-AF2
Torque
133 in-lb [15 Nm] constant
Direction of rotation
reversible with CW/CCW mounting
Position indication
visual indicator, 0° to 95° (0° is
spring return position)
Manual override
3mm hex crank (shipped w/actuator)
Auxiliary switches
2 x SPDT 7A (2.5A) @ 250 VAC, UL listed
(AF120/230-S)
one set at +5°, one adjustable 25° to 85°
Running time
150 sec. constant, independent of
load, spring return < 20 sec
Humidity
5 to 95% RH non-condensing
Ambient temperature
-22°F to +122°F [-30°C to +50°C]
Storage temperature
-40°F to +176°F [-40°C to +80°C]
Housing
NEMA type 2 / IP54
Housing material
zinc coated steel
Agency listings
UL 873 listed, CSA C22.2 No. 24 certified
Noise level
max. 45 dB (A)
Servicing
maintenance free
Quality standard
ISO 9001
Weight
6.9 lbs (3.1 kg)
22
Torque min. 133 in-lb, for control of air dampers
Application
For on-off, fail-safe control of dampers in HVAC systems.
Actuator sizing should be done in accordance with the damper
manufacturer's specifications. Control is on-off from an auxil-
iary contact, or a manual switch.
The actuator is mounted directly to a damper shaft up to 1.05"
in diameter by means of its universal clamp. A crankarm and
several mounting brackets are available for applications where
the actuator cannot be direct coupled to the damper shaft.
©
Operation
The AF series actuators provide true spring return operation for
reliable fail-safe application and positive close off on air tight
dampers. The spring return system provides consistent torque
to the damper with, and without, power applied to the actuator.
The AF series provide 95° of rotation and are provided with a
graduated position indicator showing 0° to 95°. The AF has a
unique manual positioning mechanism which allows the set-
AF230 (-S) US
ting of any damper position within its 95° of rotation. The AF
230 VAC ±14%
series actuators are shipped at +5° (5° from full fail-safe) to
provide automatic compression against damper gaskets for
50/60 Hz
tight shut-off. When power is applied to the AF series, the
6.5 W
manual mechanism is released. The actuators will now try to
2.5 W
close against the 0° position during its normal control opera-
tions. The manual override can also be released physically by
11 VA
the use of a crank supplied with the actuator.
The AF uses a brushless DC motor which is controlled by an
Application Specific Integrated Circuit (ASIC). The ASIC monitors
and controls the actuator's rotation and provides a digital rotation
sensing function to prevent damage to the actuator in a stall con-
dition. The actuator may be stalled anywhere in its normal rota-
tion without the need of mechanical end switches. The actuators
are Double Insulated so a ground connection is not required.
The AF120/230-S
iary switches. These SPDT switches are provided for safety
interfacing or signaling, for example, for fan start-up. The
switching function at the fail-safe position is fixed at +5°, the
other switch function is adjustable between +25° to +85°.
Dimensions
K4-2 US (supplied)
1/2" Centered
(Default)
3/4" Centered
(Field Selectable)
1.05" Centered
(Field Selectable)
K4-1 US (optional)
3/4" to 1.05"
Adjustable
K4 US (optional)
3/8" to 3/4"
Adjustable
version is provided with 2 built-in auxil-
US
[All numbers in brackets are in millimeters.]
0.65" [16.5]
0.19" [5]
10.47" [266]
0.39" [10]
2.64"
5.85" [148.5]
[67]
0.35" [9]
0.26" [6.5]
1.97"
[50]
®