Addonics Technologies DDU3SAS Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Дисковий дублікатор Addonics Technologies DDU3SAS. Addonics Technologies DDU3SAS 6 сторінок. 1:3 blu-ray / dvd duplicator

Друкувати сторінку

9. Image

Function#9 Image is valid only when a hard disk is installed. Disc is loaded to hard disk as an

image file.

9.1 Load

Load function loads whole disc data from any writers into the current partition of the hard disk.

"P:A" means current partition is A.

9.2 Delete Image

If you want to delete an image file stored in a particular partition, you can use this function to

delete image. Press ENT , the system will confirm with you for the action, use ▲ ▼ to select Yes or

No, then press ENT for confirmation.

9.3 Image Info

To check selected image information. First, enter into the function and press ▼ for more

information.

9.4 Compare Image

This function is used to check if created image is identical to source disc.

When result shows on LCD, press ENT for more detail information.

Compare result :

OK: Source and target disc are identical

Fail: TOC not match, compare skipped due to contains not match.

Diff: shows how many bytes are different.

9.5 Select Image

This function is to select a partition as source image from the hard disk. Pressing ▲ ▼ to select a

partition, LCD will show image name and capacity.

9.6 Image Src Drive

This function is used to set the image source drive for loading disc data into a particular partition.

Enter into the function and use ▲ ▼ to select image source drive.

9.7 ImageFormat Info

This function shows which format is used for current hard disk. It is related to function#12.4 Format

HDD.

9.8 Edit

This function is to edit selected image's title, sub1 title and sub2 title. Only valid when the current

partition contains an image file can title. A title should be composed of 1 to 13 characters. The

character can be alphabet, number or the combination of both. Use ▲ ▼ to select the number or

alphabet. After selecting a desired one, press ENT for next character, the end of key in, press and

hold ENT for 2 sec and release for next title.

Technical Support:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

9.9 Format HDD

Hard disk must be formatted by the system for the very first time. Hard disk will be partitioned into

the chosen partition format. If no hard disk is installed, LCD will show the message as No Valid HDD!

All data on the hard drive will be erased after the hard disk format. After the hard drive is formatted

correctly, LCD will show " Format HDD ok!.", Press ENT to verify HDD or press ▼ and choose No return

back to menu.

9.10 LoadImage Method

This function is to change the way to save Image. There are 2 formats for choice: Auto and Manual.

Auto means system auto assign partition for loaded image. Manual let you to choose which partition to

load image to.

10 Edit Track (for Audio CD only)

Function#10 Edit Track is exclusively designed for editing a collection of favorite songs from CDs. In

other words, you can collect songs on a number of CDs and merge them into a single CD. There are 3

sub-functions: CD to CD, CD to HDD and Close Session.

10.1 CD to CD Edit

To select songs from source CD, and then burn into a blank CD-R/RWs.

You can press ▼ to see the rest of tracks. If you want to select the track, press ENT then a "+" will

shows up, press ENT again will cancel the selection. After selection, use ▲▼ move to the "End" which

is between 1st track and last track. Press ENT to end of selection, and use ▲ ▼ to confirm Yes or No.

Press ENT after burning, system will ask if you want to continue edit, use ▲ ▼ to confirm Yes or No. If

you want to continue edit, the current source CD will be ejected and ask you to insert next disc. Repeat

the above process for editing.

After editing, system will show ''Close all disc's session ? Yes", use ▲ ▼ to confirm Yes or No.

Once session is closed, no more tracks can be added.

Attention:

Commercial audio player might not able to play open session disc, close session is suggested for

max. compatibility.

10.2 CD to HDD Edit

To select tracks from single or multi-audio CD and create image to specific partition of HDD

The basic operation method is same as CD to CD Edit, system still ask you to insert empty disc

even the target drive is HDD. If burning successful, system will show ''Image load OK'', which

means the selected tracks are written to temporary partition.

Press ENT after burning, system will ask if you want to continue edit, use ▲ ▼ to confirm Yes or No.

If you want to continue edit, the current source CD will be ejected and ask you to insert next disc.

Repeat the above process for editing. If ''No'' is selected, system will show ''Burn or Move to partition

?'', use ▲ ▼ to confirm Burn or Move.

Burn : Burn the selected tracks to CD

Move to partition : Create an image for selected tracks.