Consumerware CID98-LS Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Абонентська скринька Consumerware CID98-LS. Consumerware CID98-LS 20 сторінок. Large screen caller id

Друкувати сторінку

W A L L M O U N T I N G

1. Hold the wall mounting bracket against the wall and use a pencil to

mark the position of the mounting holes.

2. Remove the bracket and drill two holes into the wall to install the

plastic expanding wall anchors (not supplied).

3. Press a plastic anchor into each hole

and gently tap the anchors into the wall with a hammer until the

anchors are completely seated.

1 2

4. Attach the wall mounting bracket to the anchors using two screws.

5. Connect the phone cords to the Call Waiting ID unit

(see Step 1 of Set-up Instructions on Page 2).

6. Slide the unit down onto the wall mounting bracket until it

snaps into place.

7. Plug the power adapter into a wall outlet not controlled by a

wall switch and plug the power adapter jack into the top of the

Call Waiting ID unit.

1 3