Abus FU5110 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Датчики безпеки Abus FU5110. Abus FU5110 6 сторінок. Radio-controlled motion sensor

Preface

Dear Customer,

Thank you for purchasing this radio-controlled motion sensor. You made the right decision in

choosing this state-of-the-art technology,

which complies with the current standards of domestic and European regulations. The CE has been

proven and all related certifications are available from the manufacturer upon request.

To maintain this status and to guarantee safe operation, it is your obligation to observe these

operating instructions! In the event of questions, please contact your local specialist dealer.

This radio-controlled motion sensor is used for interior object surveillance. It monitors the

movement of body heat and reports it to a radio alarm system.

Read carefully the notes and advice in these operating instructions! If you do not

follow these instructions, your guarantee claim becomes invalid! We can accept no

liability for the consequences!

No part of the product may be changed or modified in any way.

Installation

1. Open the case by loosening the screw on the base of the sensor and removing the rear.

2. Insert the supplied lithium battery (type AA / 3.6V) correctly in the housing provided (make

sure the polarity is correct).

3. To deactivate the creep-under protection or activate immunity against false alarms caused by

pets, remove the PCB by unscrewing the fixing screw. Rotate the cover downwards. Replace

the PCB and fix it properly.

Selecting the installation location

The sensor is designed for mounting on a wall or in a corner (Fig. 2). Holes have already been cut

out of the rear for this purpose. Use only suitable wall plugs and screws for the installation. When