DAPAudio Concert D3472 Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Спікери DAPAudio Concert D3472. DAPAudio Concert D3472 13 сторінок. Concert series

Backside CSA-18H (D3472)

Fig. 3

20) Fan: Cooling the built-in amplifier inside the subwoofer. Ensure these fans are clear of external

obstructions.

21) Gain Control (Volume): Controls the levels of incoming signal to the speaker.

22) Phase Switch: Sets the polarity of the system.

23) Ground/Lift: Remove ground from circuit to eliminate hum caused by ground loops.

24) Signal Through (XLR Male): Sends parallel full- range signal out to other CSA components.

25) Signal Input (XLR Female): Connects the speaker to your mixer to obtain full-range signal

or getting full-range signal from CSA-18-H / CSA-18-LH through a patch cable (not included).

26) Power Cord Connector: Connect to Power with the included power cord.

27) Power Output (Through): Supply power to other CSA components using a patch power cable (included).

28) Fuse: 8A

29) Power Switch: ON /OFF