DURASONIC XPS240-4L Посібник користувача - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник користувача для Ультразвуковий очищувач ювелірних виробів DURASONIC XPS240-4L. DURASONIC XPS240-4L 18 сторінок.

Друкувати сторінку

Problem

Cleaner operates but does not

maintain set temperature.

Cleaner operates but display does

not

function.

Decreased ultrasonic activity.

Service Information

With normal use, your Ultrasonic Cleaner should not require servicing. However, if it

fails to operate satisfactorily, first try to diagnose the problem by following the

suggestions in the Troubleshooting Guide.

If you find that your cleaner needs repair, carefully pack and return it to Duraline

Systems, Inc. If under warranty, remember to include proof of purchase.

Your cleaner will be shipped by ground service unless you specify otherwise.

Technical Support

39 Western Highway

West Nyack, NY 10994

Toll-Free 877-561-0500

Cause

Malfunctioning heater or

sensor

components.

Interrupted calibration

sequence.

Timer board malfunctions.

Bad touchpad panel.

Solution is not

degassed.

Solution is spent.

Solution level is incorrect for

load.

Tank bottom is covered with

soil

particles.

Using deionized water in the

tank.

Warning

DANGER: High voltage inside the cleaner!

What to do

Call nearest authorized service

Press SET DISPLAY.

Call nearest authorized service

Make sure that tank was filled with warm

tap water plus cleaning solution and has

run 5-10 minutes.

Change

solution.

Adjust solution to within 1 ½" from top of

tank, filled with warm tap

water.

Empty,

then clean tank with warm

Wipe with a nonabrasive

cloth.

Deionized water does not cavitate as

actively as soapy tap

water.

center.

water.