DAPAudio D6551 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Спікери DAPAudio D6551. DAPAudio D6551 8 сторінок.

PSU-620P

Troubleshooting

No Sound

Always check if all the cables and cords are connected. Always turn off power to the area before

checking the wires, to prevent electric shock.

If everything works properly and there is still no sound, revisit the manufacturer's instructions to make sure

they were followed during installation. If everything was installed correctly and there is still no sound, you

may want to consider bringing in a professional to take a look at your speaker.

Sound Warping

If the sound coming out of your speaker is loud enough, but seems to be warped or distorted, your treble

or bass levels may need to be adjusted.

If there are not many pieces of furniture in the room and the floor has no carpet or rug, then you will most

likely have to set your treble to minus. With very little in the room to absorb the sound, too much treble

can make the sound bounce off of fixtures in the room, making it tinny sounding.

With the bass, if the speaker is too close to a wall and is not aimed properly, then you will need to set the

bass to minus, to stop the low tones from bouncing off of the walls or large pieces of furniture.

Power taps:

Line voltage:

Frequency response:

Sensitivity:

Housing:

Color:

IP rating:

Dimensions:

Weight:

Design and product specifications are subject to change without prior notice.

Ordercode: D6551

5/10/20W

100V

110-15 kHz

92 dB

ABS

White

IP55

265 x 185 x 290 mm (LxWxH)

1,8 kg

Website:

www.Dap-audio.info

Email: