contactile PapillArray Tactile Посібник з монтажу та експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Мікроконтролери contactile PapillArray Tactile. contactile PapillArray Tactile 12 сторінок.
Друкувати сторінкуPapillArray Tactile Sensor Development Kit (v2.0) – Installation and Operation Manual
Document #: PTSDK_2.0_MAN_DEC21
1 Introduction
The PapillArray Tactile Sensor Development Kit (v2.0) is a system of (up to) two PapillArray Tactile
Sensor arrays and a Controller. Each PapillArray Tactile Sensor array can measure 3D
displacement, 3D force, and vibration on each sensing element, as well as global 3D force, global
3D torque, the onset of slip, and friction. The Controller supplies power for (up to) two sensors and
coordinates the simultaneous data acquisition from up to two PapillArray Tactile Sensors; i.e.,
coordinates sampling of the 9 pillars if one sensor is connected to the Controller, 18 pillars if two
sensors are connected to the Controller. The Development Kit is shipped with visualisation
software and (optional) C++ libraries for Windows and Linux environments and a ROS node for
developing software control algorithms using the sensor signals.
The main components of the PapillArray Tactile Sensor Development Kit (v2.0) are shown
in Figure 1.1, connected to a laptop running the visualisation software.
Figure 1.1 – The PapillArray Tactile Sensor Development Kit (v2.0). Laptop not included.
This document contains the installation and operation manual for the PapillArray Tactile Sensor
Development Kit (v2.0).
www.contactile.com
Page 4