Addonics Technologies MSHDU11T Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Дисковий дублікатор Addonics Technologies MSHDU11T. Addonics Technologies MSHDU11T 8 сторінок. 1:11 combo msata hdd duplicator

Друкувати сторінку

Addonics Technologies MSHDU11T Посібник користувача

Step 1. Insert the mSATA SSD

into the mSATA connector on the

PCB.

Step 2. Push down the other end

of the mSATA SSD until it is

latched securely by the hold

down clip.

NOTE: The completed flash drive

has the same dimension of a 9mm

2.5" HDD

Step 3. Turn over the flash drive.

Step 4. On the Duplicator, move the silver button slightly to the right to open the door.

Step 5. Insert the completed adapter into the drive bay with the SATA connector toward

the rear, metal side up. The drive should slide in easily, don't force it.

Step 6. Close the door on the drive bay. It should also give little resistance, don't force it.

As soon as the drive is in position it will power up.

Phone: 408-453-6212

Drive Installation

Email: