Audiovalve CORDA EARTUBE-1 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Audiovalve CORDA EARTUBE-1. Audiovalve CORDA EARTUBE-1 11 сторінок. Small-power amplifier specially designed to drive headphones
Друкувати сторінкуReplacing tubes
The EARTUBE-1 uses three tubes 6N3P and two tubes GU17 (or its equivalents QQE03/12, RS1023,
6360)
If you want to exchange tubes, please disconnect the power cord before removal of the top cover. Also
make sure that all pins are properly mounted into the sockets. It is not uncommon that a pin is bend
and doesn't enter the socket.
Do not run the device without the top cover in place!
Technical data
Measures:
Weight:
Power supply:
Maximal amplification (1 kHz):
Maximum output:
Input impedance:
Output impedance:
28 x 30 x 11 cm
6.0 kg
US-Version:
European Version:
16 dB at 200 Ohm
35 Volts at 200 Ohm
47 kOhm
20 Ohm
100/120 Volts, 50/60 Hz
200/240 Volts, 50/60 Hz