Audiovalve LUMINARE 2015 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Підсилювач Audiovalve LUMINARE 2015. Audiovalve LUMINARE 2015 17 сторінок. Ultra highend headphone tube amplifier
Друкувати сторінкуLUMINARE
ultra highend headphone tube amplifier ___________________
The Luminare was developed especially for the highest-quality reproduction with earphone-sand serves
very well complete range of impedances from 8 up to 2000 ohms and electrostatic headphones. He
unfolds his big strength with roughly 5 watts per canal in 100 ohms.
The amplifier owns switchable entrances. Thus can be connected, e.g., CD player and TUNER at the
same time.
The circuit of the amplifier owns 4 tubes of the Type PCL 805 and prepares the signal for the output
stage tubes as OTL mode first line and support a step down / step up output transformer for STAX or
low impedance headphones.
The final tubes work constantly in Class A and are post-regulated automatically optimally in the Bias
closed current, so that tolerance and aging of the tubes do not matter.
The care tensions are won from a strong, free of litter, Torodial-Transfomator. The amplifier itself rests
on one single two-page printed circuit board and was adapted signal-technically optimally. All parts on
the PCB are of the best quality and selected carefully to do justice to the requirements of the
reproduction in every regard. The case is from metal and prevents interferences from the outside. It is
available in the colors black and silver as standard and in a new more expensive line named "IVORY
EDITION".
Like all products of AudioValve this amplifier also distinguishes itself especially by his exceptional
musicality which is based at last also on the fantastic technical values of the circuit and their stability. As
a user you will be able to enjoy this product in the highest perfection for many years enthusiastically and
come with it to the pleasure of fantastically detached musical reproduction with your headphones.