Duratax Onyx 100 Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Зарядний пристрій Duratax Onyx 100. Duratax Onyx 100 8 сторінок.
Друкувати сторінку
INSTRUCTION MANUAL
The Onyx 100 charger is perfect for entry-level electric car or boat
modelers who want automatic peak detection charger for NiCd and
NiMH batteries, and that will accept AC or DC input power. Selectable
charge currents range from 1 to 4 amps, for cells as small as 600mAh
"AAA" and as big as sub-C size – good for 1/18
models. A unique jack is built-in which is handy for charging 4, 5, or 8
cell radio batteries! The small size and light weight make the Onyx 100
charger easy to use at home, or to take to the track.
It is strongly recommended to completely read this manual before use! Damage resulting from misuse
or modification will void your warranty.
SPECIFICATIONS
AC input:
DC input:
Battery types:
Battery capacity range:
Fast charge current:
Fast charge termination:
Fast charge safety timer:
Peak sensitivity:
Auto-trickle current:
Controls:
LED indicator:
Output connections*:
Protective devices:
Case size:
Weight:
*
Charge adapters available separately:
™
• Standard to Vendetta
, Mini Quake
®
• Standard to Futaba
Tx Charge Jack (DTXP4151)
• Standard to Airtronics
®
/Hitec
®
• Standard to JR
/Spektrum
®
®
• Standard to Deans
Ultra
SPECIAL FEATURES
• Tiny, lightweight built-in switching AC power supply is great for portability and small pit areas.
• Selectable charge currents of 1A, 2A, and 4 amps with auto-trickle function.
• Peak detection intelligence eliminates the need for tracking the charge state of the battery before charge, and an
automatic trickle charge tops off packs to maximum power.
• An auto-start function with status LED make setup and use a snap.
• Compatible with nickel-cadmium (NiCd) and nickel-metal hydride (NiMH) battery types.
• Includes a built-in socket for charging 4- or 5-cell receiver batteries, and even 8-cell transmitter batteries.
• A DC power lead with alligator clips easily connects to many types of 12V DC power sources.
• Solid-state reverse polarity and current overload safety devices ensure trouble-free operation.
®
110V AC 60Hz
11-15V DC, built-in lead with alligator clips
4-8 NiCd or NiMH Cells (4.8-9.6V, limited to 7 cells on DC)
600-6000mAh
1, 2, or 4A linear (2A limit on AC)
peak detection
90 minutes
8mV
1/20 fast charge setting
auto-start, switchable current selector
red
built-in lead with standard connector
built-in jack for charging 4, 5, or 8 cell radio packs
solid-state reverse polarity and current overload
3.5 x 4.1 x 1.1" (90 x 104 x 29mm)
9.17 oz (260 g)
™
, RS4 Battery (DTXC2210)
®
Tx Charge Jack (DTXP4152)
®
Tx Charge Jack (DTXP4153)
male (GPMM3131)
th
to 1/8
th
scale electric