Addonics Technologies UDFH15-C Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Дисковий дублікатор Addonics Technologies UDFH15-C. Addonics Technologies UDFH15-C 17 сторінок. Compact usb duplicator controller
Друкувати сторінку
Compact USB Duplicator controller user manual
system memory buffer and start to execute a task immediately when target device(s)
inserted. Duplicator does not have to wait for all target device(s) inserted in order to
start the execution of the task at the same time. No matter the data size of the source
device, duplicator can asynchronously execute a task if Asynchronous Mode is
enabled. Go to 6.2 Asynchronous Mode to enable or disable this function.
a. Insert source media into the source channel, select the task to execute from the menu,
and press ENT button. Duplicator will start to execute the task now.
b. Target devices can be plugged in during the execution process, and will start to execute the
task immediately
c. Target device can be removed when it finishes the execution process and its green
LED is solid on. New target device can be plugged into the same channel for execution
of the task again.
d. LCD display will show the percentage of execution process, the number of successful and
failed target(s). Here the percentage of execution process displayed is only for the least
processed target device.
e. During the execution process, the status of each target device can be checked by
using the ▲ and ▼ buttons.
f. After the task is done for all target devices, press ESC button to exit from the task. LCD
display will show the total number of successful and failed target(s), and total execution
time. Go to 6.10 Show Result Time to set up the display of time.
g. Don't need to wait for all target devices to be done. Each channel executes the task
asynchronously.
Page 7 of 17