Addonics Technologies UDFHNVM15 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Дисковий дублікатор Addonics Technologies UDFHNVM15. Addonics Technologies UDFHNVM15 2 сторінки. 1:15 nvme/flash/hdd duplicator
Друкувати сторінку
Connect the NVMe USB adapters on the two M2 NVMe docking stations to the Compact
USB duplicator as shown in diagram above using the included USB-C cables and the USB-A
male to USB-C adapters
Rear view
www.addonics.com
Front view
Technical Support (M-F 8:30am - 5:00pm PST)
Loading NVMe SSD onto the docking station
Step 1
Step 2
Attaching the NVMe SSD to the duplicator
1.
Turn off the duplicator
2.
Install the NVMe SSD into each adapter on the docking station as shown in the
diagram above. There is no special tool required. The NVMe SSD is temporary
secured in the adapter by the hold down clip on the side of the adapter.
3.
Connect the adapter with the source SSD to the source USB port and the
adapters with the target SSDs to the target USB ports on the USB duplicator, using
the USB-C cables and the USB-A male to USB-C adapters that come with the unit.
(see the Front View diagram for reference)
Package content:
•
1:15 Compact USB duplicator main unit (model: UDFH15-C)
•
NVMe docking station with eight (8) NVMe SSD to USB 3.1 adapter (model:
M2NVM8DS), 2 units
•
One power cord
•
Sixteen (16) 10" USB-C to USB-A cables
•
This quick start user guide
•
Compact USB duplicator controller user guide
Phone: 408-453-6212
Email. www. Addonics.com/support/query/