DAPAudio IEM-100 Beltpack Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофонна система DAPAudio IEM-100 Beltpack. DAPAudio IEM-100 Beltpack 19 сторінок. Wireless in ear monitor set
Також для DAPAudio IEM-100 Beltpack: Посібник з експлуатації (17 сторінок)

Друкувати сторінку

Description of the device

Features

The IEM-100 is a Wireless In Ear Monitor Set from Dap Audio.

• UHF-band PLL Synthesized design.

• Frequency agility over a 25MHz bandwith, with 48 pre-programmed frequencies avaiable.

• Built-in limiter circuitry eliminates distortion under excessive input levels.

• Front panel monitoring headphone jack

• Dual-antenna true diversity receiver, eliminating signal dropout and enhancing RF stability.

Overview

1. Power switch

Turns transmitter on or off.

2. Headphone out jack

To connect a monitoring headphone.

3. Headphone volume control

Used to adjust the headphone volume level.

4. Limit indicator L

Lights if the incoming signal (Left/ channel 1)exceeds the limiting threshold.

5. Display

6. Limit indicator R

Lights if the incoming signal (Right/ channel 2)exceeds the limiting threshold.

7. Menu button

8. Up button

9. Set button

10. Down button

11. Antenna

12. XLR balanced Audio Out connector

13. ¼" Phone jack audio Input connector (Unbalanced High Z).

14. Gain Switch

Used to set the input sensitivity.

15. Power input connector.

Please use the supplied AC adapter only.

Fig. 1

Fig. 2