Duratuf PG99 Інструкція з монтажу Посібник з монтажу - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Зберігання на відкритому повітрі Duratuf PG99. Duratuf PG99 17 сторінок.

Друкувати сторінку

ROOF ASSEMBLY CONT...

STEP 3:

• Position 1 x roof sheet so that the top of the sheet is at the

centre of the Ridge Beam and the side of the sheet over hangs

the end of the Ridge Beam and the Top Plate by 15mm.

• Ensure the Ridge Beam and the Top Plate are straight.

• Nail /screw 4 x corners of the Roof Sheet as shown, ensuring

the ribs on the Roof Sheet line up with the front Roof Sheet

and the back Wall Sheet. Fasten off the first sheet.

STEP 4:

• Position the second Roof Sheet, and rivet to first roof sheet as

shown.

• Fasten off as per Step 2.

• Rivet and nail/screw off the remaining Roof Sheets, ensuring

the ribs line up with the front Roof Sheets and the back Wall

Sheets.

STEP 5:

• Place barge flashings on roof at end of shed

ensuring the diagonal trimmed end is facing

out. (See diagram on pg 5)

• Rivet the Barge Flashings to the roof and the

side wall, using four rivets on top of barge and

four into the side (fig.3).

STEP 6:

• Rivet the 2 Ridge Caps together using 4 x

rivets, so total flashing is 3.050m long.

Rivet the Ridge Cap to the centre of the roof

using 10 x rivets as shown (fig.2).

STEP 7:

• Place spouting in position and rivet to Barge Flashings

at each end and rivet to roof sheets (1 rivet per 1

sheet) (fig.4).

SIDE

WALL

SIDE

WALL

BACK WALL

RIDGE

SIDE

WALL

Barge

X 4

fig.3

TOP PLATE

BACK WALL

BOTTOM PLATE

FRONT WALL

TOP PLATE

BACK WALL

BOTTOM PLATE

FRONT WALL

= Clout

= Screw

TOP PLATE

SIDE

BOTTOM PLATE

WALL

FRONT

WALL

X 4

Spouting

SIDE

fig.1

fig.2

fig.4