Duratuf SENTRY SHEDS SS1515 Інструкція з монтажу Посібник з монтажу - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Зберігання на відкритому повітрі Duratuf SENTRY SHEDS SS1515. Duratuf SENTRY SHEDS SS1515 15 сторінок.
Друкувати сторінку
ROOF ASSEMBLY
SELECT:
3 x 1.720 Roof Sheets
1 x 1.550 Spouting
2 x 1.720 Barges
20 x 40mm Weatherseal Nails
22 x Rivets
STEP 1:
Ensure Shed is sitting level and square.
Lay Roof Sheets on the Top Plates (with slots at front).
Rivet sheets together at overlaps with 2 x rivets per join.
STEP 2:
Position the Roof Sheets with front overhang of 130mm at each
end (fig. 1).
Using 4 x 40mm weatherseals, nail the Roof Sheets to the Top
Plates at each corner, ensuring ribs on the Roof Sheets line up with
ribs on the Wall Sheets (fig.2).
STEP 3:
Ensure the Front and Back Top Plates are straight. Nail the roof
sheets to the front & back Top Plates, using 1 x nail per pan (fig.2).
STEP 4:
Place barge flashings on roof at end of shed ensuring the diagonal
trimmed end is at the front.
Rivet the Barge Flashings to the roof and the side wall, using four
rivets on top of barge and four into the side (fig.3).
STEP 5:
Place spouting in position and rivet to Barge Flashings at each end
and rivet to roof sheets (1 rivet per 1 sheet).
IMPORTANT—FOR SHEDS WITH OPTIONAL CLEAR
ROOF PANEL
Assemble as below, making sure that the Clear Roof Sheets
overlap the standard roof sheets on both sides.
The Clear Roof Panel must be secured to the front and back
Top Plates. Pre drill and fasten with the 40mm weatherseal
nails provided..
130mm
11
TOP PLATE
BACK WALL
BOTTOM PLATE
SIDE
WALL
X 4
Barge
X 4
fig.1
SIDE
WALL
FRONT
WALL
130mm
fig.2
fig.3