Duratuf KIWI SHEDS MK3 Інструкція з монтажу Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Притулки Duratuf KIWI SHEDS MK3. Duratuf KIWI SHEDS MK3 16 сторінок. Base size 3380mm x 1715mm
Друкувати сторінку
TO AVIOD CORROSION:
•
Where at all possible try not to trap metal filings between two sheets. Remove all metal filings before riveting.
•
Carbon in pencils reacts with the Zinc/Aluminium coating on steel. Use ink to mark steel.
TERMS EXPLANATION
•
To Tack: To Tack on a wall sheet means to use minimum nails hammered partly in to hold Wall Sheets in position. Should a Wall
Sheet need to be re-positioned, the nails can easily be prized out.
•
If a window is required, identify Wall Sheet(s) with window hole pre-cut. Lean up Wall Sheets where window(s) are to be located.
MK3 WALL CLADDING
CLADDING DETAIL
Birds Eye View
fig. 1
6
Note:
When fitting
Gable End
Sheets ensure
they overlap
correctly (fig 1).
The overlap
direction may
differ from clad-
ding detail be-
low.