Addonics Technologies AE5IDECSU2 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Корпус Addonics Technologies AE5IDECSU2. Addonics Technologies AE5IDECSU2 12 сторінок. External usb 2.0 enclosure

Create multiple partitions
1. If you pressed N, then you're going to create multiple partitions. To
do this, you'll need to set the size of the new partition. This is done
by entering a value next to "Enter partition size in Mbytes or percent
of disk space to create a Primary DOS Partition."
For example, if your new hard drive is 20GB and you'd like to create
two 10GB drives, entering 50% will do just fine. To enter a number in
Mbytes, take the total number in Mbytes and divide it in half to get
the correct number to input. To make things easier, just use a
percentage of the total hard drive and let your computer do the math
for you.
2. When you've finished entering the size of the new partition, hit Enter
to create it.
3. Press Esc to return to the new drives main menu.
4. From here, select 1 to "Create DOS Partition or Logical DOS Drive."
5. Now it's time to create the extended partition. To do this, select 2
from the menu and hit Enter.
6. A screen that says, "Enter partition size in Mbytes or percent of disk
space to create an Extended DOS Partition" will appear. You should
notice that the computer did the math for you and filled in the
remaining hard drive space to be partitioned. If this number is OK,
press Enter to complete the process. If it's not, and you plan on
creating additional partitions, lower the number accordingly and then
press Enter.
7. After fdisk creates the partition, press Esc to return to the new hard
drive's main menu.
8. Before the new extended partition will work, it needs to have a
Logical DOS Drive created on it. To do this, select 1 on the list to
"Create DOS Partition or Logical DOS Drive."
9. Select 3 from the list to "Create Logical DOS Drive(s) in the
Extended DOS Partition" and hit Enter.
10. Your computer will then verify drive integrity and automatically
deliver the size of the extended drive. You should see a number next
to "Enter logical drive size in Mbytes or percentage of drive." This
number should equal the size of the extended drive you created
earlier.
11. Press Enter to "Create Logical DOS Drive(s) in the Extended DOS
Partition."
12. After hitting Enter, you'll see a new letter assigned to the new
partition you just created.
13. Press Esc to exit this screen and return to main menu.
Addonics Technologies
8