Apitor APR041 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Навчальне обладнання Apitor APR041. Apitor APR041 2 сторінки.

Друкувати сторінку
Connect to Apitor Robot
Short press the power button
of the control module. The
every 1 second.
*
Please don't connect to Apitor Robot directly from the Bluetooth connection page of your
tablet/smartphone. Please remember, always connect Apitor Robot from the"Apitor Kit" App.
LED Status Indication
Status of Use
After the control unit is powered on
During use, short press the power
button
While the control unit is powered
on, press and hold the power
button for 10 seconds
During the control unit is powered
on
During use
Enable your tablet/smartp-
hone's Bluetooth and bring
your tablet/smartphone clo-
se to the control module.
LED Status
B
Blue lights are always on.
R
seconds.
R
seconds.
B
5 times every 1 second, only once.
R
Open the "Apitor Kit" App,
click the pairing button,
follow a few steps, the
pairing will be completed
automatically.
Indication
Bluetooth is not connected.
Bluetooth is connected.
P
Reset to factory defaults
Low battery indicator, need to
replace new batteries.
The use of power is too large and
the batteries need to be replaced
or the power usage needs to be
reduced.