DURAVIT DL 7541 Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень DURAVIT DL 7541. DURAVIT DL 7541 5 сторінок.
Друкувати сторінку
1
A 110 V GFCI outlet is required.
Mark the holes to be drilled for
the anchors.
5
Prior to mounting, remove the
mirror front(s) of the cabinet by
unlatching each hinge. Also
remove side panels.
MAL_Delos_DL7541/15.04.1
2
Using a 3/8" drill bit, drill the
anchor holes that have been
marked.
6
Plug the unit into outlet and
lift the unit up and onto the
mounting brackets.
3
The plastic anchors provided
are for concrete wall
applications.
7
Check the cabinet is leveled
and securely attached to the
wall.
4
Screw the bracket(s) to the
wall at the specified locations.
For the wood stud walls, bolts
should be screwed into wood
backing.
8
Check the screws which allow
adjustment of the unit. The
top screw will adjust front
to back and the bottom screw
will adjust up and down.
Make adjustments to the level
as needed.