Addonics Technologies SU3CS Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Корпус Addonics Technologies SU3CS. Addonics Technologies SU3CS 4 сторінки. Sapphire series usb 3.0 / esata drive enclosure
Друкувати сторінку
eSATA cable
Power Cable
1. Loosen the two cover screws on the back of the unit found on the left and
right edges. Remove the rear cover, then slide the top cover off.
2. Remove the front plate and replace with a 5.25" drive, or a 2.5" or 3.5"
device mounted in a 5.25" mounting bracket using the 5.25" drive
mounting holes.
3. Reassemble the unit.
4. Connect the power supply from an AC outlet to the back of the unit.
5. Connect an eSATA or USB host to the unit and turn it on.
NOTE: When connecting the unit to a host using USB, there must be no cable connected to the
eSATA port on the back of the unit.
www.addonics.com
Installation
Technical Support (M-F 8:30am - 6:00pm PST)
USB Cable
Phone: 408-453-6212
Email: www.addonics.com/support/query/