APLICOM A11 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Реєстратори даних APLICOM A11. APLICOM A11 11 сторінок.

Select the installation method from these following options:

Figure 5.

With the dual lock fastener. Before

installation, cut the dual lock fastener in two

pieces, 6cm each. Attach another half of the

fastener to the bottom of A11 device and other

half firmly to the surface on which the unit shall be

fixed. Use the fastener which is delivered in the

package.

Figure 6. There are four mounting lugs on the

sides of the A11 device cover. Install the A11

device using these mounting lugs with the cable

tie. Put the cable tie through the openings.

Maximum width of the cable tie is 4,8mm. Use

good quality cable ties, for example UV-Resistant

if sun is an issue.

Figure 7. With the screws. There are two holes for

max. 4mm screws.