Aplisens PC-29B Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Aplisens PC-29B. Aplisens PC-29B 20 сторінок. Pressure transmitters

11.

INSPECTIONS. SPARE PARTS

11.1.

During inspection, the connectors should be checked for loose connections and leaks, the

electrical connectors should be checked with regard to tightness and the state of the

housing, gaskets, cable glands, and the diaphragm seals should be checked for tarnishing

and corrosion. Readability of the tag should also be checked.

11.2.

If the transmitter is installed in a location where it could be subjected to mechanical

damage, electrical surges or malfunction is found - inspect it as needed.

In case of lack of signal in the transmission line or its incorrect value, check the state of the

cable, of the connection on terminals, etc. Determine whether the values of the supply

voltage and load resistance are correct. If the communicator is connected to the

transmitter power supply line, an indication of a fault line may be the message "No

response" or "Check connection". If the line is in order, check operation of the transmitter.

12.

Waste or damaged transmitters should be dismantled and disposed of in

accordance with Directive (2012/19/EU) on waste electrical and electronic

equipment (WEEE) or returned to the manufacturer.

12.1.

The manufacturer reserves the right to make constructional and technological changes

which do not lower the quality of the transmitters.

04.A.004

IO.PCE-28....PC-29.Exd