Aplisens WW-11ALW Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Aplisens WW-11ALW. Aplisens WW-11ALW 20 сторінок.

9.2. Local Menu, error messages

During perform some functions in Local Menu may appear on LCD2 field an error message EXXXX

(the letter E and 4 digits error code). The error message indicates that the Local Menu command has

not been executed. The persistence of the error message for a long time indicates malfunction or im-

proper operation of the display.

Periodical inspections shall be carried out in accordance with applicable standards. During the inspec-

tion, the condition of the electrical connections on terminals (reliability of the connections) and stability

of fixing of the display and mounting bracked (if used) shall be checked.

If the display at the installation site has been exposed to mechanical damage, overvoltage or incorrect

operation of the display is detected, the device should be inspected.

If there is no signal in the transmission line or its value is improper, check the condition of the

cable, connections on the terminals, etc. Check if the supply voltage and load resistance are

correct. If the transmission line is in good working order, check the functioning of the display

Parts of the display, which may be worn or damaged and thus replaced:

Name

Mounting kit

Faulty or non-operational display shall be provided to the manufacturer.

In the following cases, display should be returned directly to the manufacturer:

−

need for repair;

−

replacement of improperly selected/shipped display.

Worn or damaged devices shall be scrapped in accordance with WEEE Directive

(2012/19/EU) on waste electrical and electronic equipment or returned to the manufacturer.

Revision No. Document revision

01.A.001/2015.09 Initial version of document. Developed by DKD.

01.A.002/2016.02 ATEX version has been added. Editiorial changes. Developed by DKD.

01.B.003/2020.09 Editorial changes. Developed by the DBFD.

Revision 01.B.003/2020.09

Content

2x clamping rings

4x flat washers 6.4

4x spring washers 6.1

4x nut M6

Description of changes

EN.IO.WW.11.ALW

Description

Figure 3