Acer 12000 Посібник користувача - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник користувача для Сервер Acer 12000. Acer 12000 31 сторінка. Dual-processor system board
Також для Acer 12000: Посібник користувача (16 сторінок)
Друкувати сторінку
Table 1-4
System Error Messages
Message
Diskette Drive Controller Error
or Not Installed Floppy Disk
Controller Error
Diskette Drive Error
Diskette Drive A Type
Mismatch Floppy Drive A
Error
Diskette Drive B Type
Mismatch Floppy Drive B
Error
ECC Facility Fail
Equipment Configuration Error
Expansion ROM Allocation
Failed
Hard Disk Controller Error
Hard Disk 0 Error IDE Primary
Channel Master Drive Error
IDE Primary Channel Slave
Drive Error
Hard Disk 1 Error IDE
Secondary Channel Master
Drive Error
IDE Secondary Channel Slave
Drive Error
Hard Disk 0 Extended Type
Error
Hard Disk 1 Extended Type
Error
IRQ Setting Error
System Board
Action
Check and connect the control
cable to the diskette controller.
Check the CMOS settings in
Setup and the diskette drive cable
connections.
Run Setup and select the proper
drive type.
Run Setup and select the proper
drive type.
Contact your dealer.
Modify DRAM configuration to
agree with one of the options in
Table 1-3.
Contact your dealer.
Run Setup.
Check all cable connections.
Replace hard disk.
Check all cable connections.
Replace hard disk.
Check all cable connections.
Replace hard disk.
Check all cable connections.
Replace hard disk.
Run Setup.
Run Setup.
Run Setup.
1-27