4D systems 4DPi-32-II Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Монітор 4D systems 4DPi-32-II. 4D systems 4DPi-32-II 4 сторінки.

4DPi-32/35 Rev2.0 Workaround

Introduction

This document outlines a work around for using the 4DPi-32-II (Rev2.X) and 4DPi-35-II (Rev2.X) with the older

Raspberry Pi A and B versions with a 26-pin Header.

Background

The latest versions of the Raspberry Pi include a 40-pin Pin-header. In the older versions a 26-pin header was used

with an RCA Connector and Audio jack positioned next to the Pin-header. In the latest versions of the 4DPI-32/35,

the 26-pin female header has been replaced with a 40-pin female header to better accommodate the latest

versions of the Raspberry Pi. For this reason, it is no longer possible to physically connect the 4DPi-32 and 4DPi-35

directly onto the older versions of Raspberry Pi.

Raspberry Pi Pin header comparison RPi A / B (left) and A+, B+ and PI2 (right)

Document Updated: 09 November 2015

1/4