Apogee SS-110 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Apogee SS-110. Apogee SS-110 20 сторінок. Spectroradiometer

take a new measurement to be used as the light reference. If multiple devices are connected, the light reference scan will

apply only to the device selected in the toolbar.

Clear dark reference: Simply removes a saved dark reference scan from the selected device.

Open: Opens a previously saved *.dat or *.csv file for plotting. This function supports opening multiple files at a

time; however, only ten scans may be plotted at a time. These files must be saved in the correct format to be

compatible with Apogee Spectrovision.

Save graph as image: The current plot will be saved to an image file with the extension of your choice. Current

supported extensions include *.pdf, *.jpg, *.png, *.ps, *.eps, and *.svg.

Save graph data: The data of the current plot will be saved to a file of type *.csv or *.dat. This function supports

multi sensor plots as well.

Save graph data and image: Combines the previous two buttons in one for ease of use.

Copy graph to clipboard: Copies the current plot to the system clipboard for pasting into other applications. The

clipboard object is of type *.png.

Plot the first derivative: Plots the first derivative of the current plot data. This button is only active if a single device

is connected.

Plot the second derivative: Plots the second derivative of the current plot data. This button is only active if a single

device is connected.

Take a single measurement: The device will take a single measurement and plot the data to the screen. This is a

convenience function for manipulating the plot without the data being updated at an inopportune time.

Start continuous measurements: The device will continually take measurements as soon as the data has been

pulled from the previous scan. If multiple sensors are connected, measurements will wait until data has been pulled

from all devices so that all measurements are taken at the same time.

Pause continuous measurements: This simply pauses the continuous measurement mode. Use this function if you

are worried about losing the data from the last scan but want to manipulate the currently displayed plot that may or

may not represent the data from the last scan.

Stop continuous measurements: This completely stops continuous measurements without regard to data being

left in the device's buffer.

Sensor toggles: When a device is connected, a new toggle button will be displayed on the toolbar

representing the sensor. If the sensor is toggled, it is considered 'active' and all 'Set dark reference', 'Set

light reference', and 'Clear dark reference' button clicks will apply only to the 'active' device. Right

clicking on the device toggle button will display a pop up menu with options to rename the device or disconnect the device.