Apogee X-HD Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Комп'ютерне обладнання Apogee X-HD. Apogee X-HD 15 сторінок. X-series expansion card
Також для Apogee X-HD: Технічний паспорт (1 сторінок)

Друкувати сторінку

X-HD card – User's Guide

Warnings

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which

case the user will be required to take whatever measures necessary to correct the interference at his own expense.

The Apogee X-HD card is a computer-based device, and as such contains and uses software in ROMs. This soft-

ware, and all related documentation, including this User's Guide contain proprietary information which is protected

by copyright laws. All rights are reserved. No part of the software and its related documentation may be copied,

transferred, or modified. You may not modify, adapt, translate, lease, distribute, resell for profit or create derivative

works based on the software and its related documentation or any part thereof without prior written consent from

Apogee Electronics Corporation, U.S.A.

Trademark Acknowledgements

Digidesign, Pro Tools|HD, 192 Digital I/O, SYNC I/O and digiLink are trademarks of Digidesign, a division of Avid

Technology, Inc.

APOGEE ELECTRONICS

X-HD card – User's Guide

Declarations of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inteference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1. Re-orient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a different circuit from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTE: The use of non-shielded cable with this equipment is prohibited.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance

could void the user's authority to operate the equipment.

Apogee Electronics Corporation, 3145 Donald Douglas Loop South, Santa Monica, CA 90405.

Betty Bennett, CEO.

Industry Canada Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-

tions. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur

du Canada.

Declaration of Conformity – CE

Apogee Electronics Corporation hereby declares that the product, the X-HD card, to which this declaration relates,

is in material conformity with the following standards or other normative documents:

• EN50081-1/EN55022; 1995

• EN50082-1/IEC 801-2, 3, 4; 1992

following the provisions of:

• 73/23/EEC – Low Voltage Directive

• 89/336/EEC – EMC Directive

Declaration of Conformity – Japan

Apogee Electronics Corporation hereby declares that the X-HD card, to which this declaration relates, is in material

conformity with the VCCI Class A standard.

Declaration of Conformity – Australia

Apogee Electronics Corporation hereby declares that the X-HD card is in material conformity with AN/NZS stan-

dard requirements.

APOGEE ELECTRONICS

iii