Apollo 202 Посібник користувача

Переглянути онлайн або завантажити pdf Посібник користувача для Пейджер. Apollo 202. Apollo 202 4 сторінки.

POWER ON:

Press and release the "READ" button. The pager alerts as it powers up. Now the

pager is on standby.

POWER OFF:

Press "MODE" button until OFF appears in the LCD window. Then Press "SELECT" button. When

the pager is off, current time and alarm functions work normally. All messages that were

received prior to turning the unit off will remain in memory.

The pager has 3 standard alert modes; you can select one mode among audio (beep or music),

vibration or sleep (no alert) with the "MODE" button while the pager is on.

Audible Alerting: When the pager is initially turned on, it is automatically set to a AUDIO alert.

To change this alert to another beep or melody, press the "MODE" button until "SET ALERT?" is

displayed on the LCD. Press the "SELECT" button once and the pager displays "AUDIO?" Choices

include MUSIC melodies 1-10 and BEEP alerts 1-4. Press the "SELECT" button again and the

pager will display the current alert choice. By pressing "MODE" button, you can scan the 10

music melodies and 4 beep alerts. Choose the desired alert by pressing "READ" button.

Vibration and Sleep alerts: VIBRATION will silently alert you while SLEEP alert emits no alert

at all. To set, press the "MODE" button until "SET ALERT?" is displayed. Press "SELECT" button

once, then the "MODE" button until the pager displays "SILENT?" on the display for vibration, or

"SLEEP?" for no alert. When you make your selection, press the "READ" button.

When a message is received, the pager displays "1 Page" on the LCD and depending on the alert

mode selected:

BEEP – emits a 16 second beep alert

Music – melody plays twice

Vibration – 8 second vibration

Sleep – no alert.