Dash Go DAP001 Інструкція з експлуатації та кулінарні рецепти - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та кулінарні рецепти для Кухонна техніка Dash Go DAP001. Dash Go DAP001 17 сторінок. Rapid
peeler
Також для Dash Go DAP001: Інструкція з експлуатації та кулінарні рецепти (13 сторінок)
Друкувати сторінку
CHANGING THE PEELER BLADES
The Peeler Blades are designed for clean and easy peeling. When the Blade skips,
jams or becomes excessively clogged, it may be necessary to replace it with one of
the included replacement blades.
1.
Make sure the Rapid Peeler is turned off. Turn the Peeler upside
down and open the Blade Storage Compartment located in the
Motor Base. Take out one of the extra Peeler Blades.
2.
Remove the Blade Holder from the Peeling Arm by pinching
the Blade Release and sliding the Holder away from the
Support Rod.
3.
Detach the used Peeler Blade by sliding it, blade first, off of the
Blade holder.
10
CHANGING THE PEELER BLADES
Note: Always make sure to turn off the Rapid Peeler prior to touching or removing the
Peeler Blade. When handling the Blade, never touch the blade itself; instead hold it by
the red base.
4.
Lay the grey Blade Holder and the red Peeler Blade as shown.
The small hooks in the Blade Holder should point up.
5.
Line up the new Peeler Blade with the ridges on the Blade
Holder, then slide the Blade onto the Holder until it firmly clicks
into place. Make sure the Blade is securely attached to the
Blade Holder before proceeding.
6.
To reattach the Blade Holder, slide it back into the slot at the
end of the Peeling Arm.
11