4DSP FMC150 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління 4DSP FMC150. 4DSP FMC150 18 сторінок.

Друкувати сторінку
FMC150 User Manual

3 Installation

3.1 Requirements and handling instructions

Prevent electrostatic discharges by observing ESD precautions when handling the
card.
Do not flex the card and do not exceed the maximum torque specification on the coax
connectors.
The FMC150 daughter card must be installed on a carrier card compliant to the FMC
standard.
The FMC carrier card must support the low-pin count connector (160-pins). The FMC
carrier card may support the high-pin count connector (400-pins).
The FMC carrier card must support a VADJ/VIO_B voltage of +2.5V (LVDS mode).

4 Design

4.1 Phycisal specifications

4.1.1 Board Dimensions

The FMC150 card complies with the FMC standard known as ANSI/VITA 57.1. The card is a
single width conduction cooled mezzanine module (with region 1 and front panel I/O). The
front area holds 6 MMCX or 6 SSMC connectors. The stacking height is 10mm.
January 2012
FMC150 User Manual
www.4dsp.com
r1.6
- 7 -