AddSecure Iris Touch 220 Посібник зі швидкого встановлення та обслуговування - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення та обслуговування для Система безпеки AddSecure Iris Touch 220. AddSecure Iris Touch 220 16 сторінок.

Друкувати сторінку

1. Connections

Once you have the required GPRS signal strength power down the dialler and insert the SIM card into the

SIM card holder, then power the dialler back up.

Go back into the 'Installers Menu' and enter in the installer code that you had setup beforehand and then

select the Installation Wizard as indicated next.

IRIS Touch 220 or 240 without GPRS or after network scan completed:

Installation Wizard

Select the Installation Wizard and follow the on screen prompts.

Once you have completed the Installation Wizard and setup any additional panel interface configuration

via the settings menu you will need to check / configure the panel for the conneciton method using:

6.9.

Panel configuration

Panel configuration for dial capture

Telephone Number = the 12 digit format of the monitoring centre IP address (e.g. 192.168.0.34 would

become 192168000034).

Acoount Number: 4 – 6 digit account number allocated by the monitoring centre.

Note: If the 'Alarm Override' mode is selected, the IRIS Touch dialler replaces the phone number and the

account number used by the alarm dialler with the IP address of the monitoring centre and account

number entered during configuration, so there is no need to change any settings on the alarm dialler.

Alarm panel integration e.g. Honeywell Galaxy (RS485 connection).

If you have not already made the changes to the relevant configurations in the panel for the integration,

and require further details on these configurations then please download the full panel installation manual

from http://www.chironsc.com/downloads_security.html.

6.10.

Testing

Once all configurations are complete perform a full commissioning test with the monitoring centre. This

will normally involve testing normal alarm transmissions from the alarm panel to the monitoring centre,

and verifying that these are successfully received.

Page 10 of 16

IRIS Touch

Quick Installation & Maintenance Guide Version 1.0