Durite 0-649-31 Інструкція - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція для Пульт дистанційного керування Durite 0-649-31. Durite 0-649-31 5 сторінок. 24v li-polymer jump starter pack
Друкувати сторінку
Storage Level Indicators
Press the switch to check the battery level of Jump Starter.
The indicator will flash one by one during the period of charging. Different num-
bers of solid indicators show different storage level of Jump Starter. All indicators
lights turn off when the charging is completed and the units battery is full.
24V indicator:
a. 24V indicator light on: mean the connected vehicle battery is 24V, the circuit is
open. It can jump start the vehicle.
b. 24V indicator flash: means the battery voltage is too low to activate the 24V
system, please press the 24v button for 3 seconds to activate the circuit. When the
indicator light on, then start the vehicle within 30 seconds.
Charging the Jump Starter:
1. Plug the home adapter into the universal socket.
2. Connect 15V 1A input port of Jump Starter to the other end of home adapter.
Jump Start Vehicle Instructions:
1. Make sure that the numbers of indicators is not less than 3.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and con-
nect the BLACK clamp to the vehicle's battery negative (-) terminal.
3. The jump starter will choose the 24V automatically, 24V indicator indication
light will turn on accordingly.
4. Start the vehicle.
5. Once the vehicle has started, remove the jump cable from Jump Starter and
disconnect RED and BLACK clamps from the vehicle battery. Leave the vehicle's
engine running.
www.durite.co.uk
0-649-31-LEAF