Data Harvest EasySense Q 3 Посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник для Реєстратори даних Data Harvest EasySense Q 3. Data Harvest EasySense Q 3 20 сторінок.
Друкувати сторінкуConnect any plug-in sensors if required. If the display is turned off, press the green
#
triangle
or yellow arrow button
Use the yellow arrow button
#
down until it is pointing at Easy Log.
Press the green triangle
#
and plugged-in sensors.
Scroll
can be used to view the values from the active sensors on the LCD screen
whilst still logging.
When the investigation is complete press the red square (stop)
#
will continue to log data until you press the green triangle (enter)
choice. The data recorded will be stored as a set of data.
Note: If the Stop button was not pressed intentionally, press the red square (stop) to continue
logging.
A Finished message will be displayed, press the green triangle (enter)
#
main menu.
The data set can be downloaded using the Collect remote data option in the Sensing
Science Graph program (see the manual that accompanies the Sensing Science
software).
Once started EasySense Q
records data at a rate of 40
samples per second until it has
captured 1000 samples. At this
point the sample rate halves
(i.e. 20 samples per second) and
every other sample is discarded
(leaving 500 samples). It will
continue at this speed until it has
captured another 500 samples
(1000 total) then the sample rate
halves (i.e. 10 samples per
second) and discards half the
stored data, and so on.
EasySense Q will continue to
record data for up to 30 days.
In EasyLog mode the EasySense Q
will stay awake until the interval
between readings reaches
5 seconds or greater – at this point
it will begin to use low power
(sleep) mode between samples to
conserve battery power.
to wake up EasySense Q.
to scroll the cursor
(enter) to automatically begin recording from all built-in
Sample
Interval
Rate
(seconds)
40 per
0.025
second
20 per
0.05
second
10 per
0.1
second
2 per
0.5
second
1 per
1
second
Every
5
5 seconds
Every
15
15 seconds
Every
30
30 seconds
Every
60
1 minute
Every
300
5 minutes
Every
900
15 minutes
Every
1800
30 minutes
Every
3600
1 hour
8
Meter
Snapshot
EasyLog
Timer
. EasySense Q
to confirm your
Samples
Days Hours Min Sec
0 - 1000
0
Compress to a half
0
500 - 1000
Compress to a half
0
500 - 1000
Compress to a fifth
0
200 - 1000
Compress to a half
0
500 – 1000
Compress to a fifth
0
200 - 1000
Compress to a
0
third 330 - 1000
Compress to a half
0
500 - 1000
Compress to a half
0
500 - 1000
Compress to a fifth
3
200 - 1000
Compress to a
10
third 300 - 1000
Compress to a half
20
500 - 1000
Compress to a half
41
500 - 1000
to return to
Duration
0
0
25
0
0
50
0
1
40
0
3
20
0
16
40
1
23
20
4
10
0
8
20
0
16
40
0
11
20
0
10
0
0
20
0
0
16
0
0