Data Harvest EasySense Q 5 Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Реєстратори даних Data Harvest EasySense Q 5. Data Harvest EasySense Q 5 20 сторінок.

Launch one of the Sensing Science logging programs

i.e. Meters, Graph, Workroom or Timer. The first time

one of the programs from Sensing Science is used an

Interface option window will open. Select the Interface

as EasySense Q and Link.

Click on OK. The program will save your selection so it

will be automatically configured when next used.

Note: There is no need to switch EasySense Q on, as the

computer will automatically assume control.

The internal and any plug–in sensors connected will

automatically be recognised and calibrated.

Using EasySense Q connected to the computer after the

initial setup

Connect EasySense Q to the USB port on the computer using the USB cable

supplied.

Launch the appropriate Sensing Science program. The internal and any plug–in

sensors connected will automatically be recognised and calibrated.

For information on using EasySense Q with the Sensing Science programs refer to the

manual supplied with the Sensing Science CD ROM.

Sensing Science programs overview

Meters

This application displays live data from

analogue sensors in four different ways.

Designed to introduce students to the

idea of sensing data and interpreting

information. The program will open with

a blank display window, click on the

appropriate picture icon to open a section

window i.e. Gauge, Colour Change, Bar

or Number. Double click in a section

window and select the sensor to display

from the list.