Data Harvest EasySense Q 5 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Реєстратори даних Data Harvest EasySense Q 5. Data Harvest EasySense Q 5 20 сторінок.

Друкувати сторінку

Ways to Capture Data with EasySense Q

There are different ways that EasySense Q can be used to collect data.
1. Real time, in this mode EasySense Q is entirely driven by the software on the host
computer. The data from the sensors is transmitted immediately to the computer and
displayed on the computers screen using the applications in the Sensing Science
software. This method of collection is useful for many classroom-based experiments.
2. In Remote, in this mode EasySense Q is used to collect and store data while
disconnected from the computer. Data collection can either be setup using
EasySense Q's menu options (e.g. EasyLog, Snapshot or Timing – see stand-alone
operation below) or setup via the Graph program in the Sensing Science software to
log data for a set time period. The data collected in remote mode is stored in
EasySense Q's memory to be retrieved by the computer at a later date. Up to 4 sets
of data can be stored in EasySense Q's memory. Once the four sets have been
stored EasySense Q will overwrite the earliest data set with the new set of data
collected.

Using EasySense Q in standalone operation

EasySense Q has four working modes, displayed on the built-in LCD screen, which can
be used to collect data without being connected to the computer. These are Meter,
Snapshot, Easy Log and Timer modes.
Note: Some of the following examples show the effect seen on the LCD screen when there is no
sensor plugged into Input 2 (number 2 will be omitted from the list).
Meter
Snapshot
Easy Log
Timer
0
1) 24.5 C
3) 57.2 dBA
4) 183 1x
0
5) 23.5 C
No. Taken: 3
3) 57.2 dBA
4) 185 1x
0
5) 22.5 C
0
1) 25.5 C
3) 62.2 dBA
4) 200 1x
Use the yellow
Set Timing Mode
Timing A to B
arrow to select
Timing at A
either mode
6
Use the yellow arrow to
scroll through the sensors
No. Taken: 4
Press the green
3) 59.3 dBA
triangle to take
4) 190 1x
a sample
5) 22.5 C
Timing at A
Samples Taken: 2
150.93 ms
A time measurement is
displayed for each event
0