Data Signs PTL Compact 1 Посібник з експлуатації та технічного обслуговування - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Засоби безпеки Data Signs PTL Compact 1. Data Signs PTL Compact 1 19 сторінок. Portable traffic lights

Друкувати сторінку

Gating Control Mode

Single PTL unit use only.

Gating Control is used to control the flow of traffic from a single traffic flow direction only.

Note: The Gating Operation Mode can only be selected on a controller set up as a

MASTER, to activate this mode:

Switch the left key to PROGRAM MODE.

Use the

button to Select GATING CONTROL and select ON.

Switch the Key Switch back to SHUTTLE position.

M A I N

M E N U

Q U I C K

S T A R T

U N I T

S E T T I N G S

G A T I N G

To switch off Gating Operation Mode, follow the same process as above, selecting OFF in

step 2.

Gating control can also be used with 2 PTL units operating independently by two traffic

operators using a Walky-Talky to communicate with each other.

Note: If using 2 PTL Compact in Gating Mode, each PTL must be set on its own unique

channel number as there in NO radio-link communication between each unit and also to

eliminate risk of possible interference between the two units.

In this mode, the line of sight or distance limit does not apply.

Note: Two independent PTL Remotes are required for this operation.

Roadworks

Site

[

T Y P E

C O N T R O L

Normal line-of-sight operation not used

in this setup conﬁguration.

Two-way radios used between trafﬁc

management operators.

P T L O P E R A T I O N S M A N U A L

One-Way Road

]

G A T I N G

O F F

O N

C O N T R O L