Data Signs PTL Compact 1 Посібник з експлуатації та технічного обслуговування - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Засоби безпеки Data Signs PTL Compact 1. Data Signs PTL Compact 1 19 сторінок. Portable traffic lights

Друкувати сторінку

MAIN MENU

On Master or Slave Controllers.

While the Controller is in the PROGRAM setting, use the Up

navigate forward and back through the MENU's to select all other programming functions.

MENU: VIEW PTL STATUS

When this menu item is selected, all the current settings and status of the PTL controller

are shown.

Use the Up

or Down

MENU: QUICK START

Use the Quick Start Menu item, this will guide you through the process to set the Master

or Slave.

MENU: UNIT SETTINGS

Use this menu to set the Unit ID and Communications settings.

SUB-MENU: ID

For the PTL-Type-1 this is the same function as QUICK START.

MENU: OPERATING SETTINGS

For GATING CONTROL see section on page 11.

WIRELESS LINK (RF)

Enter the RF channel then press the

Note: you will also need to change this value to match on the other unit(s) communicating with a

Master unit.

MENU: FAULT LOG

Sub-menu: VIEW LOGS

Select this menu item to scroll through the fault log file.

More information regarding the fault log file is provided in the Fault Conditions section of this manual.

Sub-menu: ERASE ALL

Selecting this menu item deletes the fault log file that is stored on the SD memory card

MENU: ASPECT TEST

Press Master Red, Yellow, Green or Slave Yellow for Beacon Lights. Press

MENU: FACTORY SETTING

This menu item is restricted to Data Signs internal factory use.

buttons to navigate forward and back through the list.

[Master only]

button.

D A T A S I G N S A U S T R A L I A P T Y L T D

or Down

buttons to

button to exit.