Duro-Med 1012 Series Інструкція - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція для Допомога з мобільності Duro-Med 1012 Series. Duro-Med 1012 Series 4 сторінки. Ultra light aluminum rollator with loop lock brakes

Друкувати сторінку

U S E O F N E W R O L L AT O R

B E F O R E U S E , P L E A S E R E A D A L L C A U T I O N A N D W A R N I N G L A B E L S O N T H E R O L L AT O R

W A L K I N G

This unit is to be used as a mobility aid creating a natural balance. With hands

grasped securely onto handles, slowly walk behind the rollator. Gently push

forward using evenly distributed weight between handlebars.

B R A K I N G

Normal Brake can be activated by pulling the brake handle up, similar to

operating the brakes of a bicycle. This function may be applied while walking

with the rollator to slow down momentum, to stop for a moment, or to maneuver

up, down or around obstacles which may be in your path.

Parking Brake can be activated by pushing the handle down into the lock

position. This function should be activated when the user stops for a period of

time. For safety reasons, the parking brake should always be engaged before

sitting down onto the seat. For example, while shopping, it is beneficial to

WALKING MADE

activate the parking brake while stopped in an aisle to avoid the rollator from

EASY

advancing forward. To release the parking brake, gently pull up.

The braking system is convenient and easy to operate. People who may have

hand disabilities should find the brake handles wide, comfortable and

non-binding. Minimum pressure will need to be applied to activate the locking

loop brake system.

PUSH DOWN TO

RELEASE TO

SQUEEZE TO

ROLL

LOCK

STOP

F O L D I N G

Baskets should be removed before folding any rollator. From the user side of

the unit, grasp the folding strap located under the hinged seat and lift into the

folded position. The rollator will fold easily for storage or transport.

M A I N T E N A N C E

Always make sure your brakes are operating correctly before use. Keep the

brake handles free from dirt, dust and grime. Build-up of particles could cause

your brakes not to engage properly. If the brakes are not braking, check the

cables for looseness. The cables can be tightened at the adjuster screw located

where the cable is connected to the brake handle. If the cable is broken, it will

need to be replaced. Periodically check and tighten all nuts, bolts, screws and

other hardware on rollator.

LIFT SEAT AND

PULL STRAP TO

ENGAGE FOLDING

MECHANISM

w w w . d u r o m e d . c o m